Built With Purpose

Every Iron Antler arrow is cut, squared, assembled, fletched, inspected and spin tested by one builder from start to finish. Standard and Premium packages are available for both three- and four-fletch configurations.

Why Iron Antler?

Cut and Squared

Shafts are cut to your specified length and squared on both ends for consistent component alignment

Spin Tested

Completed arrows are checked to verify that shaft, component and point rotate true.

Built to Order

Choose your shaft, components, vane configuration, orientation, wraps and finished specifications.

Build Card Included

Your finished arrow specifications are documented so the setup can be repeated later.

Standard Build

Starting at $70 per dozen

A complete, carefully assembled arrow build for hunters and target archers who do not require spine indexing or weight matching.

Included

Cut to specified length
Both ends squared
Component installation
Three- or four-fletch configuration
Final spin test
Finished build card

Pricing

Three fletch: $70 per dozen
Four fletch: $80 per dozen

Premium Build

Starting at $105 per dozen

Adds individual spine alignment and weight matching for archers seeking greater consistency across the complete set.

Included

Everything in the Standard Build
Spine alignment and indexing
Weight matching
Recorded weight variation

Pricing

Three fletch: $105 per dozen
Four fletch: $115 per dozen

Optional Add-Ons

Arrow wraps: $12 per dozen

Labor pricing does not include shafts, vanes, wraps or components. Customer-supplied materials have no additional material charge. Materials sourced by Iron Antler are billed at cost plus a 10% sourcing and handling fee.

GET BUILDING!

Submit your build

Tell me about your bow, intended use, preferred components and desired arrow specifications

Review and Quote

I review the request, verify compatibility and contact you with recommendations or questions. You then receive a final Shopify invoice.

Approve and Build

Once the invoice is paid and all materials are available, your arrows are built, inspected, documented and shipped.

Iron Antler Guarantee

Every arrow is inspected and spin tested before it leaves my shop. If there is a workmanship or assembly issue related to the build discovered upon arrival, I’ll make it right.

Frequently asked questions

Every completed arrow is spin tested to verify the shaft, insert, and point rotate true. Any arrow with excessive runout is identified before it reaches the customer.

Carbon arrows naturally have a stiff and weak axis. During a Premium build, each shaft is manually evaluated to identify its natural spine orientation before assembly. Vanes are then installed in a consistent orientation across the entire set to promote repeatable arrow performance.

Each arrow and its components are weighed during the build process. Components are arranged where possible to minimize finished-weight variation across the set. Final weights and variation are recorded on the build card.

I build every arrow using the OMP Phoenix Jig to ensure repeatable vane placement and consistent results from one build to the next.

Most compound bows naturally spin arrows to the left due to string construction. For that reason, I recommend a left offset or left helical for most hunting setups. Certain broadheads or custom string builds may benefit from a different configuration, and I'm happy to recommend the best option for your setup.

A build card will have all your arrow data on it. Arrow make and spine, finished weight, inserts used, vanes used, wraps used, weight variance, cut length, FOC and build date.

Yes. You may provide all or part of the build materials. You only pay the selected labor package for customer-supplied materials.

Yes. Materials sourced by Iron Antler are billed at cost plus a 10% sourcing and handling fee. No materials are ordered until you approve the final quote.

Turnaround depends on material availability and the current build queue. An estimated completion date will be included with your quote before payment.